Template:Convert/doc

From Zoophilia Wiki
Jump to navigationJump to search

Template {{convert}} calculates measurements from one unit (you can enter) to another one, and then presents the results. For example:

{{convert|2|km|mi}} → 2 kilometres (1.2 mi)
{{convert|7|mi|km}} → 7 miles (11 km)

The available units are listed below. Multiple formatting and calculation options are listed below.

See also Help:Convert for more complete information

Unit name or symbol (abbreviation): 1 pound or 1 lb?

By default, the first value shows unit name, the second the symbols (= abbreviation). Use |abbr=on/off to change this behaviour:

{{convert|1|lb|kg}} → 1 pound (0.45 kg) (To compare; default: first value shows unit name)
{{convert|1|lb|kg|abbr=on}} → 1 lb (0.45 kg)
{{convert|1|lb|kg|abbr=off}} → 1 pound (0.45 kilograms)
  • |abbr=in toggles the default behaviour (|abbr=out):
{{convert|1|lb|kg|abbr=in}} → 1 lb (0.45 kilograms)

Adjective: a 10-mile distance

Use |adj=on to produce the adjective form. The difference:

{{convert|10|mi|km}} to go → 10 miles (16 km) to go. (To compare, default)
A {{convert|10|mi|km|adj=on}} distance → A 10-mile (16 km) distance. (Adjective form)

Rounding: 100 ft is 30 m or 30.5 m or 30.48 m?

In detail, it is 100 feet (30,480 mm)*. In practical use, it is common to round the calculated metric number. With that, there are several possibilities.

Default rounding

By default, the conversion result will be rounded either to precision comparable to that of the input value (the number of digits after the decimal point—or the negative of the number of non-significant zeroes before the point—is increased by one if the conversion is a multiplication by a number between 0.02 and 0.2, remains the same if the factor is between 0.2 and 2, is decreased by 1 if it is between 2 and 20, and so on) or to two significant figures, whichever is more precise. An exception to this is rounding temperatures (see below).
Examples of rounding
Input Displays as Note
{{convert|123|ft|m|-1}} 123 feet (40 m)
{{convert|123|ft|m|0}} 123 feet (37 m)
{{convert|123|ft|m|1}} 123 feet (37.5 m)
{{convert|550|ft|m|0}} 550 feet (168 m) Approximate value is 167.64 m
{{convert|550|ft|m}} 550 feet (170 m) Rounds to 170, when approximate value is 167.64 m
{{convert|500|ft|m|0}} 500 feet (152 m) Approximate value is 152.4 m
{{convert|500|ft|m}} 500 feet (150 m) Rounds to 150, when approximate value is 152.4 m

Convert supports four types of rounding:

Round to a given precision: use |precision=

Specify the desired precision with the fourth unnamed parameter (or third unnamed parameter if the "convert to" parameter is omitted; or fifth unnamed parameter if a range is specified; or fourth unnamed parameter again if a range is specified and the "convert to" parameter is omitted; needs to be replaced with a "precision" named parameter). The conversion is rounded off to the nearest power of ​1⁄10 this number. For instance, if the result is 8621 and the round number is "-2", the result will be 8600. If the result is "234.0283043" and the round number is "0", the result will be 234.

Round to a given number of significant figures: use |sigfig=

To specify the output number to be with n significant figures use |sigfig=<number>:

  • To compare: {{convert|1200|ft|m}} → 1,200 feet (370 m)
  • {{convert|1200|ft|m|sigfig=4}} → 1,200 feet (365.8 m)
  • {{convert|1200|ft|m|sigfig=3}} → 1,200 feet (366 m)
  • {{convert|1200|ft|m|sigfig=2}} → 1,200 feet (370 m)
  • {{convert|1200|ft|m|sigfig=1}} → 1,200 feet (400 m)

Setting |sigfig= is meaningless

  • {{convert|1200|ft|m|sigfig=0}} → 1,200 feet (370 m)*

Round to a multiple of 5: 15, 20, 25, ...

Using |round=5 rounds the outcome to a multiple of 5.

{{convert|10|m|ft}} → 10 metres (33 ft)
{{convert|10|m|ft|round=5}} → 10 metres (35 ft)

Similar: using |round=25 rounds the outcome to a multiple of 25.

{{convert|10|m|ft}} → 10 metres (33 ft)
{{convert|10|m|ft|round=25}} → 10 metres (25 ft)
To compare: {{convert|10|m|ft|sigfig=4}} → 10 metres (32.81 ft)

In a range, one can round each value individually to the default. Use |round=each:

{{convert|10 x 200 x 3000|m|ft}} → 10 by 200 by 3,000 metres (33 ft × 656 ft × 9,843 ft)
{{convert|10 x 200 x 3000|m|ft|round=each}} → 10 by 200 by 3,000 metres (33 ft × 660 ft × 9,800 ft)

Round to a multiple of a given fraction: ​2 3⁄16 inch

Specify the desired denominator using |frac=<some positive integer>. (Denominator is the below-the-slash number, for example the 3 in ​1⁄3).

{{convert|5.56|cm|in|frac=16}} → 5.56 centimetres (2+3⁄16 in)
{{convert|8|cm|in|frac=4}} → 8 centimetres (3+1⁄4 in)

The fraction is reduced when possible:

{{convert|8|cm|in|frac=100}} → 8 centimetres (3+3⁄20 in)
{{convert|8|cm|in}} → 8 centimetres (3.150 in) (To compare)

Rounding the temperatures °C, °F and K

In temperatures, the conversion will be rounded either to precision comparable to that of the input value or to that which would give three significant figures when expressed in kelvins, whichever is more precise.

{{convert|10|C|F K}} → 10 °C (50 °F; 283 K)

Note

For a temperature difference, like to convert "A rise of 20 °C", use |C-change=20 &tc.
{{convert|20|C-change|F-change K-change}} → A rise of 20 °C (36 °F; 20 K)
To compare: "A temperature of 20 °C" would yield: A temperature of 20 °C (68 °F; 293 K)

Into multiple units: 10 °C (50 °F; 283 K)

Separate the multiple output units by a space:

{{convert|10|C|F K}} → 10 °C (50 °F; 283 K)
{{convert|5|km|mi nmi}} → 5 kilometres (3.1 mi; 2.7 nmi)

Ranges of values

A range: 6 to 17 kg (13 to 37 lb)

Range indicators are entered as the second parameter (between the values). Range separators can be:

Range separators in {{convert}}
Separator Convert Result Notes
- {{convert|3|-|6|ft}} 3–6 feet (0.91–1.83 m) Input can be hyphen (-) or en dash (–), output uses en dash
– &ndash; (en dash) {{convert|3|–|6|ft}} 3–6 feet (0.91–1.83 m)
and {{convert|3|and|6|ft}} 3 and 6 feet (0.91 and 1.83 m)
and(-) {{convert|3|and(-)|6|ft}} 3 and 6 feet (0.91–1.83 m) |abbr=on abbreviates the first unit
and(-)|abbr=on {{convert|3|and(-)|6|ft|abbr=on}} 3 and 6 ft (0.91–1.83 m)
or {{convert|3|or|6|ft}} 3 or 6 feet (0.91 or 1.83 m)
to {{convert|3|to|6|ft}} 3 to 6 feet (0.91 to 1.83 m)
to(-) {{convert|3|to(-)|6|ft}} 3 to 6 feet (0.91–1.83 m) |abbr=on abbreviates the first unit
to(-)|abbr=on {{convert|3|to(-)|6|ft|abbr=on}} 3 to 6 ft (0.91–1.83 m)
to about {{convert|3|to about|6|ft}} 3 to about 6 feet (0.91 to about 1.83 m)
+/- {{convert|3|+/-|6|ft}} 3 ± 6 feet (0.91 ± 1.83 m)
± &plusmn; {{convert|3|±|6|ft}} 3 ± 6 feet (0.91 ± 1.83 m)
+ {{convert|3|+|6|ft}} 3 + 6 feet (0.91 + 1.83 m)
, {{convert|3|,|6|ft}} 3, 6 feet (0.91, 1.83 m)
, and {{convert|3|, and|6|ft}} 3, and 6 feet (0.91, and 1.83 m)
, or {{convert|3|, or|6|ft}} 3, or 6 feet (0.91, or 1.83 m)
by {{convert|3|by|6|ft}} 3 by 6 feet (0.91 by 1.83 m)
x {{convert|3|x|6|ft}} 3 by 6 feet (0.91 m × 1.83 m) |abbr=on abbreviates and repeats the first unit
× &times; {{convert|3|×|6|ft}} 3 by 6 feet (0.91 m × 1.83 m)
x|abbr=on {{convert|3|x|6|ft|abbr=on}} 3 ft × 6 ft (0.91 m × 1.83 m)
xx |xx| is deprecated. Use |x| instead
* |*| is deprecated. Use |x| instead

Multiple dimensions: 6 m × 12 m (20 ft × 39 ft)

Use "by"
{{convert|6|by|12|ft|m}} → 6 by 12 feet (1.8 by 3.7 m)
Use "×" or ""x""
{{convert|6|x|12|m|ft}} → 6 by 12 metres (20 ft × 39 ft)

In science, the formal way is to set |x| and |abbr=on (keeping dimensions right, like in area = x km2):

{{convert|6|x|12|m|ft|abbr=on}} → 6 m × 12 m (20 ft × 39 ft)

About feet, inch in ranges and multiples

While it is possible to enter feet, inch in a simple conversion, this is not possible for ranges:

  • {{convert|1|ft|3|in|mm}} → 1 foot 3 inches (380 mm) (to compare)
  • {{convert|1|ft|3|in|x|3|ft|5|in|mm}} → 1 foot 3 inches ([convert: unknown unit])*

Words

Spelling of unit name: UK metre or US meter?

Default spelling of units is en-UK. To show en-US spelling, use |sp=us:

{{convert|1|m|ft}} → 1 metre (3.3 ft) -- default
{{convert|1|m|ft|sp=us}} → 1 meter (3.3 ft)

Spell out numbers: ten miles

To write a number in words, use |spell=in:

{{convert|10|mi|m|spell=in}} → ten miles (16,000 m)

To spell out both in and out values, use |spell=on:

{{convert|10|mi|m|spell=on}} → ten miles (sixteen thousand metres)

To make first letter a capital, use |spell=In, |spell=On

{{convert|10|mi|m|spell=In}} → Ten miles (16,000 m)
{{convert|10|mi|m|spell=On}} → Ten miles (sixteen thousand metres)

Remember that the spelling of the units (ft, m) is independently set by |abbr=. To the extreme:

{{convert|10|mi|m|spell=on|abbr=off|sp=us}} → ten miles (sixteen thousand meters)

Extra words: 4 planted acres

Incomplete section
{{convert|4|acre||adj=pre|planted}} → 4 planted acres (1.6 ha)

Extra adjective words: A 10-foot-long corridor

{{convert|4|ft|m|adj=mid|-long}} → 10-foot-long (3.0 m)

Plural or singular: 1 inch, 2 inches

The unit symbol is singular always. Depending on the preceding number only, a unit name can be shown plural.

  • {{convert|1|metre}} → 1 metre (3 ft 3 in)
  • {{convert|2|metre}} → 2 metres (6 ft 7 in)
  • {{convert|2|metre|abbr=on}} → 2 m (6 ft 7 in)
Exception

Entering the unit spelled |foot| forces singular output "foot", whatever the number is.

  • {{convert|100|foot|abbr=off}} → 100 foot (30 metres)

Grammatical construction: The 18-, 24- and 32-pounder (8, 11 and 15 kg) cannons

This example is from article Fort McHenry:

The American defenders had 18-, 24- and 32-pounder (8, 11 and 15 kg) cannons.

This formatted result is not possible straightforward by using {{convert}}. However, it can be made in three steps.

Step 1: Enter the input numbers and units in {{convert}} just to get the calculated output:
  • had {{convert|18 |, |24 |, |32 |lb |kg |0 }} cannons
→ had 18, 24, 32 pounds (8, 11, 15 kg) cannons
The core conversion should look good now. You can save this (or preview).
Step 2: We need the resulting text in plain code in the page, not as a {{convert|...}} template.
For this, add subst: to the template name (for 'substitute') :
As a check: the preview result should show the conversion correct, with the numbers still right.
Now save this.
→ had 18, 24, 32 pounds (8, 11, 15 kg) cannons
Step 3: When opening the edit screen again, you'll see that the text is there in code. The template {{convert|...}} itself has disappeared. You can change the text as needed. The edit screen text is:
had 18,&nbsp;24,&nbsp;32 pounds (8,&nbsp;11,&nbsp;15&nbsp;kg) cannons
You can edit this text to add the grammar:
  • had 18-,_24-_and_32-pounder (8,&nbsp;11_and_15&nbsp;kg) cannons
After saving your edit, it shows:
→ "had 18-, 24- and 32-pounder (8, 11 and 15 kg) cannons".

Numbers

Using an SI prefix: gigameter (Gm), or micrometer (μm)

Template:Sidebar metric prefixes (small) Units can have an SI prefix like G before the unit: Gm, and giga before the name: gigameter. These are plain multiplication factors.

To illustrate, these are trivial calculations (from meter to meter), showing the multiplication factor:

  • 12 Gm (1.2×1010 m)
  • 12 μm (1.2×10−5 m)

The prefix can be added before the SI unit (here: unit m for meter):

  • {{convert|12|Gm|mi|abbr=on}} → 12 Gm (7,500,000 mi)
  • Mm: 12 Mm (7,500 mi)
  • km: 12 km (39,000 ft)
  • mm: 12 mm (0.47 in)
  • μm: 12 μm (0.012 mm)
  • um: 12 μm (0.012 mm) (letter "u" can be used for "μ" here)

The prefix can be used in the output unit:

  • {{convert|12000|mi||Mm|abbr=on}} → 12,000 mi (19 Mm)
  • {{convert|12|in|μm|abbr=on}} → 12 in (300,000 μm)

As an exception, the non-SI unit "inch" can have the "μ" prefix too)

  • {{convert|12|μm|μin|abbr=on}} → 12 μm (470 μin)
Further information: Help:Convert units § SI prefixes

Engineering notation: 7 × 106 m

Engineering number notations like 7E6 (for 7 × 106) are to be entered as a "prefix" en to the unit:

{{convert|7|e6m}} → 7 million metres (23,000,000 ft)

The same is possible for the output unit:

{{convert|23,000,000|ft|e6m}} → 23,000,000 feet (7.0×10^6 m)

Any standard unit (not a combination, multiple, or built-in unit) can have such a prefix:

e3 (thousand), e6 (million), e9 (billion), e12 (trillion), e15 (quadrillion).

Scientific notation: 1.23×10−14

In scientific notation, a number is written like Template:Rnd. At the moment, there is incomplete support for this in {{convert}}. As input, the number is recognized but not re-formatted. In output, very large and very small numbers are presented in scientific notation:

  • {{convert|12.3e-15|atm|atm|abbr=on}} → 12.3×10−15 atm (1.23×10−14 atm)
  • {{convert|0.00000005|atm|atm|abbr=on}} → 0.00000005 atm (5.0×10−8 atm)

Workaround:

  • {{convert|0.3|nPa|atm|abbr=on|order=flip|sigfig=1}} → 3×10−15 atm (0.3 nPa)
See also: {{rnd}} for this notation.

Input with fractions: 1+1⁄2 inches (38.1 mm)

The number to convert can be written in fractions. Both / (keyboard slash) and ⁄ (fraction slash) are accepted:

{{convert|1/2|in|mm|1}} → 1⁄2 inch (12.7 mm)
{{convert|1⁄2|in|mm|1}} → 1⁄2 inch (12.7 mm)

With integers, use a + sign

{{convert|2+1⁄2|in|mm|1}} → 2+1⁄2 inches (63.5 mm)

When negative, use a hyphen - and repeat it:

{{convert|-2-1⁄2|in|mm|1}} → −2+1⁄2 inches (−63.5 mm)
{{convert|2-1⁄2|in|mm|1}} → 2–1⁄2 inch (50.8–12.7 mm) Note: this is read as a range
{{convert|-2+1⁄2|in|mm|1}} → [convert: invalid number] Red XN Should be a number, not an expression (do not require a calculation)

Output with horizontal fraction bar in: 1/2 inch

Using a double slash (//) returns a horizontal bar fraction:

Thousands separator: 1,000 mi and 1000 mi

In input, a comma for thousands separator is accepted. A gap (space) is not. In output, by default, the thousand separator is the comma:

  • {{convert|1,234,567|m|ft}} → 1,234,567 metres (4,050,417 ft)
  • {{convert|1,234,567|m|ft}} → 1,234,567 metres (4,050,417 ft)
  • {{convert|1 234 567|m|ft}} → [convert: invalid number] Red XN

Set |comma=off to remove the separator:

  • {{convert|1234567|m|ft|comma=off}} → 1,234,567 metres (4,050,417 ft)*

Use |comma=gaps to set digit grouping by gap (<space>) in larger numbers (thousands separator):

  • {{convert|1234567|m|ft}} → 1,234,567 metres (4,050,417 ft) (To compare, default)
  • {{convert|1234567|m|ft|comma=gaps}} → 1234567 metres (4050417 ft)

Setting |comma=5 or |comma=gaps5 will only add the separator when the number of digits is 5 or more:

  • {{convert|1234|m|ft}} → 1,234 metres (4,049 ft) (To compare, default)
  • {{convert|1234|m|ft|comma=5}} → 1234 metres (4049 ft)
  • {{convert|1234567|m|ft|comma=5}} → 1,234,567 metres (4,050,417 ft)
  • {{convert|1234|m|ft|comma=gaps5}} → 1,234 metres (4,049 ft)*
  • {{convert|1234567|m|ft|comma=gaps5}} → 1,234,567 metres (4,050,417 ft)*

Output manipulation

Brackets and separators: 10 m [33 ft]

Punctuation that distinguishes the two measurements is set by |disp=.
Options are: b (the default), sqbr, comma, or, br, x|...:

{{convert|10|m|ft}} → 10 metres (33 ft) -- ( ) brackets are the default
{{convert|10|m|ft|disp=sqbr}} → 10 metres [33 ft]
{{convert|10|m|ft|disp=comma}} → 10 metres, 33 ft
{{convert|10|m|ft|disp=or}} → 10 metres or 33 feet

Setting |disp=br will force a new line (<br>)

{{convert|10|m|ft|disp=br}} → 10 metres
33 feet

Setting |disp=x|... allows any text as separator:

{{convert|10|m|ft|disp=x|_MyText_}} → 10 metres_MyText_33 ft -- (To display spaces, use &nbsp;)

Flipping (reordering) the two measurements: 1,609.3 metres (1 mile)

Setting |order=flip will flip (swap) the two measurements:

{{convert|1|mi|m}} → 1 mile (1,609.3 metres) (To compare, default)
{{convert|1|mi|m|order=flip}} → 1,609.3 metres (1 mile)

When converting to multiple units, the effect is:

{{convert|10|km|mi nmi|order=flip}} → 6.2137 miles; 5.3996 nautical miles (10 kilometres)
{{convert|10|km|nmi mi|order=flip}} → 5.3996 nautical miles; 6.2137 miles (10 kilometres)

Displaying parts of the result: 2 (1.5)

It is possible to display only parts of the conversion result:

Convert Output Description
{{convert|2|cuyd|m3}} 2 cubic yards (1.5 m3) Default, to compare
{{convert|2|cuyd|m3|abbr=values}} 2 (1.5) Input and output numbers
{{convert|2|cuyd|m3|disp=unit}} cubic yards Input unit
{{convert|2|cuyd|m3|disp=unit|adj=on}} cubic-yard Input unit, adjective (hyphenated)
{{convert|2|cuyd|cuyd|0|disp=out|abbr=off}} 2 cubic yards Input (workaround)
{{convert|2|cuyd|m3|abbr=~}} 2 cubic yards [cu yd] (1.5 m3) Input: both name and symbol
{{convert|2|cuyd|m3|disp=unit2}} m3 Output unit (symbol)
{{convert|2|cuyd|m3|disp=unit2|abbr=off}} cubic metres Output unit (name)
{{convert|2|cuyd|m3|disp=number}} 1.5 Output value
{{convert|2|cuyd|m3|disp=out}} 1.5 m3 Output value and unit
{{convert|2|cuyd|m3|disp=out|abbr=off}} 1.5 cubic metres Output value and unit

Display input name and symbol: 2 kilopascals [kPa]

Setting |abbr=~ returns both name and symbol of the first (input) unit:

{{convert|2|kPa|psi|abbr=~}} → 2 kilopascals [kPa] (0.29 psi)
A {{convert|2|kPa|psi|abbr=~|adj=on}} pressure → A 2-kilopascal [kPa] (0.29 psi) pressure

Table options

For the wikitable structure, there are two options: split over columns and make the table sortable.

Show numbers only in columns in a table

Using {convert} in a table cell, with |disp=table splits the result over two columns:

{{convert|10|m|ft|disp=table}} → style="text-align:right;"|10

|style="text-align:right;"|33

|disp=tablecen does the same, and also centers the text:

{{convert|20|m|ft|disp=tablecen}} → style="text-align:center;"|20

|style="text-align:center;"|66

The units are added as a column header:

  m ft
|disp=table 10 33
|disp=tablecen 20 66
|disp=<other> (default) 30 metres (98 ft)

Sorting

Use both |disp=table |sortable=on to produce table columns (pipe symbols), with sortable table column. As of January 2013, only the first (lefthand) column will sort (improvements pending).
{{convert|10|m|ft|disp=table|sortable=on}} →

style="text-align:right;" data-sort-value="7001100000000000000"|10 |style="text-align:right;" data-sort-value="7001100000000000000"|33

This shows the hidden numerical sortkey:

align="right"|<span style="display:none">7001100000000000000</span>10 |align="right"|33

m ft
15+3⁄4 52
15.5 51
16.0 52.5
16 52

Units

See also: complete Convert/list of units

The table below lists units supported by {{convert}}. More complete lists are linked for each dimension. For a complete list of all dimensions, see full list of units.

Page Template:Divbox/styles.css has no content.
Table of contents
  1. Area
  2. Density
  3. Energy
  4. Force
  5. Length
  6. Mass
  7. Speed
  8. Temperature
  9. Torque
  10. Volume

{{Convert}} uses unit-codes, which are similar to, but not necessarily exactly the same as, the usual written abbreviation for a given unit. These unit-codes are displayed in column 3 of the following tables. These are accepted as input by {{convert}} as the second and third unnamed parameters:

  • {{convert|100|kg|lb}} → 100 kilograms (220 lb)
  • {{convert|100|lb|kg}} → 100 pounds (45 kg)

The unit-codes should be treated as case-sensitive:

  • {{convert|100|Mm|mm}} → 100 megametres (1.0×1011 mm)

The output of {{convert}} can display multiple converted units, if further unit-codes are specified after the second unnamed parameter (without the pipe separator). Typical combination output units are listed below in column 7.

  • {{convert|55|nmi|km mi}} → 55 nautical miles (102 km; 63 mi)
  • {{convert|1|oz|ozt g gr}} → 1 ounce (0.91 ozt; 28 g; 440 gr)

Some units have alternative unit-codes. These are shown in brackets in column 3, e.g. °F (F). Either may be entered for Fahrenheit (but not a lower-case f).

Abridged list of supported units
Explanation
system unit unit-
code 		symbol or
abbrev. 		notes sample default
conversion 		combination
output units
the system(s) to which the unit belongs units listed by name unit-code to use in template symbols shown in output other notes about the units sample of the default conversion for the unit output codes for multiple conversions


AREA
(Full list)
system unit unit-
code 		abbrev-
iation 		notes sample default
conversion 		combination
output units
SI square kilometre km2 km2 US spelling: square kilometer
 1.0 km2 (0.39 sq mi)
  • km2 sqmi
square metre m2 m2 US spelling: square meter
 1.0 m2 (11 sq ft)
  • m2 sqft
square centimetre cm2 cm2 US spelling: square centimeter
 1.0 cm2 (0.16 sq in)
  • cm2 sqin
square millimetre mm2 mm2 US spelling: square millimeter
 1.0 mm2 (0.0016 sq in)
  • mm2 sqin
non-SI metric hectare ha ha 1.0 ha (2.5 acres)
Imperial
&
US customary 		square mile sqmi sq mi 1.0 sq mi (2.6 km2)
  • sqmi km2
acre acre (none) 1.0 acre (0.40 ha)
square yard sqyd sq yd 1.0 sq yd (0.84 m2)
square foot sqft
(sqfoot) 		sq ft long code "sqfoot" outputs square foot (and never feet) 1.0 sq ft (0.093 m2)
  • sqft m2 (sqfoot m2)
square inch sqin sq in 1.0 sq in (6.5 cm2)
  • sqin cm2
Other square nautical mile sqnmi sq nmi 1.0 sq nmi (3.4 km2; 1.3 sq mi)
dunam dunam (none) For alternative spellings and definitions see the full list 1.0 dunam (0.0010 km2; 0.00039 sq mi)
tsubo tsubo (none) 1.0 tsubo (3.3 m2)


DENSITY
system unit unit-
code 		abbrev-
iation 		notes sample default
conversion 		combination
output units
Metric kilogram per cubic metre kg/m3 kg/m3 1.0 kg/m3 (1.7 lb/cu yd)
  • kg/m3 lb/ft3 (kg/m3 lb/cuft)
  • kg/m3 lb/yd3 (kg/m3 lb/cuyd)
gram per cubic metre g/m3 g/m3 1.0 g/m3 (0.0017 lb/cu yd)
  • g/m3 kg/m3
  • g/m3 lb/ft3 (g/cm3 lb/cuft)
  • g/m3 lb/yd3 (g/cm3 lb/cuyd)
Imperial
&
US customary 		pound per cubic foot lb/ft3 lb/cu ft 1.0 lb/cu ft (0.016 g/cm3)
  • lb/ft3 kg/m3 (lb/cu ft g/m3)
  • lb/ft3 g/m3 (lb/cu ft g/m3)
pound per cubic yard lb/yd3 lb/cu yd 1.0 lb/cu yd (0.59 kg/m3)
  • lb/yd3 kg/m3 (lb/cuyd kg/m3)
  • lb/yd3 g/m3 (lb/cuyd g/m3)


ENERGY
(Full list)
system unit unit-
code 		abbrev-
iation 		notes sample default
conversion 		combination
output units
SI gigajoule GJ GJ 1.0 GJ (280 kWh)
megajoule MJ MJ 1.0 MJ (0.28 kWh)
kilojoule kJ kJ 1.0 kJ (240 cal)
hectojoule hJ hJ 1.0 hJ (24 cal)
decajoule daJ daJ 1.0 daJ (2.4 cal)
joule J J 1.0 J (0.24 cal)
decijoule dJ dJ 1.0 dJ (0.024 cal)
centijoule cJ cJ 1.0 cJ (0.0024 cal)
millijoule mJ mJ 1.0 mJ (0.00024 cal)
microjoule μJ (uJ) μJ 1.0 μJ (2.4×10−7 cal)
nanojoule nJ nJ 1.0 nJ (2.4×10−10 cal)
cgs megaerg Merg Merg 1.0 Merg (0.10 J)
kiloerg kerg kerg 1.0 kerg (0.10 mJ)
erg erg (none) 1.0 erg (0.10 μJ)
Watt-hour multiples terawatt-hour TWh TWh 1.0 TWh (3.6 PJ)
TW.h TW⋅h
gigawatt-hour GWh GWh 1.0 GWh (3.6 TJ)
GW.h GW⋅h
megawatt-hour MWh MWh 1.0 MWh (3.6 GJ)
MW.h MW⋅h
kilowatt-hour kWh kWh 1.0 kWh (3.6 MJ)
kW.h kW⋅h
watt-hour Wh Wh 1.0 Wh (3.6 kJ)
W.h W⋅h
Electron-
volt multiples
gigaelectronvolt GeV GeV 1.0 GeV (0.16 nJ)
megaelectronvolt MeV MeV 1.0 MeV (0.16 pJ)
kiloelectronvolt keV keV 1.0 keV (0.16 fJ)
electronvolt eV eV 1.0 eV (0.16 aJ)
millielectronvolt meV meV 1.0 meV (0.16 zJ)
Calorie multiples calorie Cal Cal The thermo-chemical calorie is the default definition. For others, see the full list. 1.0 Cal (4.2 kJ)
megacalorie Mcal Mcal 1.0 Mcal (4.2 MJ)
kilocalorie kcal kcal 1.0 kcal (4.2 kJ)
calorie cal cal 1.0 cal (4.2 J)
millicalorie mcal mcal 1.0 mcal (4.2 mJ)
pound/
ounce-foot/
inch-hour-minute-second 		foot-poundal ftpdl ft⋅pdl 1.0 ft⋅pdl (0.042 J)
foot-pound force ftlbf ft⋅lbf 1.0 ft⋅lbf (1.4 J)
ftlb-f ft⋅lbf
inch-pound force inlbf in⋅lbf 1.0 in⋅lbf (110 mJ)
inlb-f in⋅lbf
inch-ounce force inozf in⋅ozf 1.0 in⋅ozf (7.1 mJ)
inoz-f in⋅ozf
horsepower-hour hph hp⋅h 1.0 hp⋅h (0.75 kWh)
British thermal unit British thermal unit Btu Btu The International Steam Table British thermal unit is used. For others, see the full list. 1.0 Btu (1.1 kJ)
BTU BTU
TNT-based units gigatonne of TNT GtTNT (none) 1.0 gigatonne of TNT (4.2 EJ)
gigaton of TNT GtonTNT (none)
megatonne of TNT MtTNT (none) 1.0 megatonne of TNT (4.2 PJ)
megaton of TNT MtonTNT Mt
kilotonne of TNT ktTNT (none) 1.0 kilotonne of TNT (4.2 TJ)
kiloton of TNT ktonTNT kt
tonne of TNT tTNT (none) 1.0 tonne of TNT (4.2 GJ)
ton of TNT tonTNT (none)
Other
Hartree Eh Eh 1.0 Eh (27 eV)
rydberg Ry Ry 1.0 Ry (14 eV)
tonne of oil equivalent toe toe 1.0 toe (42 GJ)
barrel of oil equivalent BOE BOE 1.0 BOE (6.1 GJ)
cubic foot of natural gas cuftnaturalgas (cufootnaturalgas) Unit-code cufootnaturalgas will show "cubic foot of natural gas" if plural. 1.0 cubic foot of natural gas (1.1 MJ)
latm[convert: unknown unit] latm (none) 1.0 latm[convert: unknown unit]
Latm Latm[convert: unknown unit]
impgalatm[convert: unknown unit] impgalatm (none) 1.0 impgalatm[convert: unknown unit]
USgalatm[convert: unknown unit] USgalatm
(usgalatm) 		(none) 1.0 USgalatm[convert: unknown unit]
U.S.galatm
(usgalatm) 		U.S.galatm[convert: unknown unit]


FORCE
(Full list)
system unit unit-
code 		abbrev-
iation 		notes sample default
conversion 		combination
output units
SI giganewton GN GN Allows triple output units. See: full list. 1.0 GN (220,000,000 lbf)
  • GN LT-f
  • GN LTf
  • GN ST-f
  • GN STf
meganewton MN MN Allows triple output units. See: full list. 1.0 MN (220,000 lbf)
  • MN LT-f
  • MN LTf
  • MN ST-f
  • MN STf
kilonewton kN kN Allows triple output units. See: full list. 1.0 kN (220 lbf)
  • kN LT-f
  • kN LTf
  • kN ST-f
  • kN STf
newton N N 1.0 N (0.22 lbf)
  • N lb-f
  • N lbf
  • N oz-f
  • N ozf
millinewton mN mN 1.0 mN (0.0036 ozf)
  • mN oz-f
  • mN ozf
  • mN gr-f
  • mN grf
micronewton μN (uN) μN 1.0 μN (0.0016 grf)
  • μN gr-f
  • μN grf
nanonewton nN nN 1.0 nN (1.6×10−6 grf)
  • nN gr-f
  • nN grf
cgs megadyne Mdyn Mdyn 1.0 Mdyn (2.2 lbf)
kilodyne kdyn kdyn 1.0 kdyn (0.036 ozf)
dyne dyn
(dyne) 		dyn 1.0 dyn (0.016 grf)
millidyne mdyn mdyn 1.0 mdyn (1.6×10−5 grf)
Metric gravitational units tonne-force t-f tf 1.0 tf (9.8 kN; 0.98 LTf; 1.1 STf)
tf tf
kilogram-force kg-f kgf 1.0 kgf (9.8 N; 2.2 lbf)
kgf kgf
gram-force g-f gf 1.0 gf (9.8 mN; 0.035 ozf)
gf gf
milligram-force mg-f mgf 1.0 mgf (9.8 μN; 0.015 grf)
mgf mgf
Avoirdupois-based units poundal pdl pdl 1.0 pdl (0.14 N)
long ton-force LT-f LTf 1.0 LTf (10.0 kN)
  • LT-f ST-f
LTf long ton-force
  • LTf STf
short ton-force ST-f STf 1.0 STf (8.9 kN)
  • ST-f LT-f
STf short ton-force
  • STf LTf
pound-force lb-f lbf 1.0 lbf (4.4 N)
lbf lbf
grain-force gr-f grf 1.0 grf (640 μN)
grf grf


LENGTH
(Full list)
system unit unit-
code 		abbrev-
iation 		notes sample default
conversion 		combination
output units
SI megametre Mm Mm US spelling: megameter
 1.0 Mm (620 mi)
kilometre km km US spelling: kilometer
 1.0 km (0.62 mi)
  • km mi
metre m m US spelling: meter
 1.0 m (3 ft 3 in)
  • m ft
  • m ftin
centimetre cm cm US spelling: centimeter
 1.0 cm (0.39 in)
  • cm in
millimetre mm mm US spelling: millimeter
 1.0 mm (0.039 in)
  • mm in
micrometre μm (um) μm US spelling: micrometer
 1.0 μm (3.9×10−5 in)
nanometre nm nm US spelling: nanometer
 1.0 nm (3.9×10−8 in)
non-SI metric ångström Å
(angstrom) 		Å 1.0 Å (3.9×10−9 in)
Imperial
&
US customary 		mile mi mi 1.0 mi (1.6 km)
  • mi km
furlong furlong (none) 1.0 furlong (660 ft; 200 m)
chain chain (none) 1.0 chain (66 ft; 20 m)
rod rd rd For other names of this unit see the full list. 1.0 rd (17 ft; 5.0 m)
fathom fathom (none) fathom ≡ 6 ft 1.0 fathom (6.0 ft; 1.8 m)
yard yd yd assumes the international definition 1.0 yd (0.91 m)
foot ft (foot) ft long code "foot" outputs foot (and never feet) 1.0 ft (0.30 m)
  • ftin (feet and inches)
  • ft m (foot m)
inch in in 1.0 in (25 mm)
  • in cm
  • in mm
Other nautical mile nmi nmi the international standard nautical mile
For other nautical miles see the full list. 		1.0 nmi (1.9 km; 1.2 mi)
parsec pc pc 1.0 pc (3.3 ly)
light-year ly ly 1.0 ly (63,000 AU)
astronomical unit AU AU 1.0 AU (150,000,000 km; 93,000,000 mi)


MASS
(Full list)
system unit unit-
code 		abbrev-
iation 		notes sample default
conversion 		combination
output units
SI kilogram kg kg Allows triple output units. See: full list. 1.0 kg (2.2 lb)
  • kg lb
  • kg st
gram g g 1.0 g (0.035 oz)
  • g oz
milligram mg mg 1.0 mg (0.015 gr)
  • mg gr
microgram μg (ug) μg 1.0 μg (1.5×10−5 gr)
non-SI metric tonne t t Allows triple output units. See: full list. 1.0 t (0.98 long tons; 1.1 short tons)
  • t LT
  • t ST
metric ton MT t
  • MT LT
  • MT ST
Avoirdupois long ton LT (none) 2,240 lb
used mostly in the British Commonwealth.
Allows triple output units. See: full list. 		1.0 long ton (1.0 t)
  • LT t
  • LT MT
  • LT ST
long ton long ton
short ton ST (none) 2,000 lb
used mostly in the US.
Allows triple output units. See: full list. 		1.0 short ton (0.91 t)
  • ST t
  • ST MT
  • ST LT
short ton short ton
stone st st 14 lb
used mostly in the British Commonwealth except Canada.
Allows triple output units. See: full list. 		1.0 st (14 lb; 6.4 kg)
  • st kg
  • st lb
pound lb lb Allows triple output units. See: full list. 1.0 lb (0.45 kg)
  • lb kg
  • lb st
ounce oz oz 1.0 oz (28 g)
  • oz g
drachm drachm (none) 1.0 drachm (1.8 g)
drachm dram (none)
grain gr gr equivalent to the troy grain 1.0 gr (0.065 g)
Troy troy ounce ozt ozt 1.0 ozt (1.1 oz; 31 g)
other carat carat (none) 1.0 carat (0.20 g)


SPEED
(Full list)
system unit unit-
code 		abbrev-
iation 		notes sample default
conversion 		combination
output units
SI metre per second m/s m/s US spelling: meter per second
 1.0 m/s (3.3 ft/s)
  • m/s ft/s (m/s foot/s)
non-SI metric kilometre per hour km/h km/h US spelling: kilometer per hour
 1.0 km/h (0.62 mph)
  • km/h mph
Imperial
&
US customary 		mile per hour mph mph 1.0 mph (1.6 km/h)
  • mph km/h
  • mph kn
foot per second ft/s (foot/s) ft/s long code "foot/s" outputs foot per second (and never feet) 1.0 ft/s (0.30 m/s)
  • ft/s m/s
Maritime units knot kn (knot) kn 1.0 kn (1.9 km/h; 1.2 mph)
  • kn mph


TEMPERATURE
(Full list)
system unit unit-
code 		abbrev-
iation 		notes sample default
conversion 		combination
output units
SI K K K Allows triple output units. See: full list. 1.0 K (−272.15 °C; −457.87 °F)
  • K °C (K C)
  • K °R (K R)
  • K °F (K F)
°C °C (C) °C 1.0 °C (33.8 °F)
  • °C K (C K)
  • °C °R (C R)
  • °C °F (C F)
Imperial
&
US customary 		°R °R (R) °R 1.0 °R (0.556 K; −458.670 °F; −272.594 °C)
  • °R K (R K)
  • °R °C (R C)
  • °R °F (R F)
°F °F (F) °F 1.0 °F (−17.2 °C)
  • °F K (F K)
  • °F °C (F C)
  • °F °R (F R)
Celsius change C-change Used for temperature intervals instead of actual temperatures
Example:  {{convert|5|C-change|0}} warmer
Result: 5 °C (9 °F) warmer
Fahrenheit change F-change Used for temperature intervals instead of actual temperatures
Example:  {{convert|10|F-change|0}} colder
Result: 10 °F (6 °C) colder


TORQUE
(Full list)
system unit unit-
code 		abbrev-
iation 		notes sample default
conversion 		combination
output units
Industrial
SI newton-metre Nm N⋅m Triple combinations are also possible. See the full list. 1.0 N⋅m (0.74 lbf⋅ft)
  • Nm kg.m
  • Nm lb.ft
Non-SI metric kilogram metre kg.m kg⋅m 1.0 kg⋅m (9.8 N⋅m; 7.2 lb⋅ft)
  • kg.m Nm
  • kg.m lb.ft
Imperial
&
US customary 		pound force-foot lb.ft lb⋅ft 1.0 lb⋅ft (1.4 N⋅m)
  • lb.ft Nm
  • lb.ft kg-m
Scientific
SI newton-metre N.m N⋅m Triple combinations are also possible. See the full list. 1.0 N⋅m (0.74 lbf⋅ft)
  • N.m kgf.m
  • N.m lbf.ft
Non-SI metric kilogram force-metre kgf.m kgf⋅m 1.0 kgf⋅m (9.8 N⋅m; 7.2 lbf⋅ft)
  • kgf.m N.m
  • kgf.m lbf.ft
Imperial
&
US customary 		pound force-foot lbf.ft lbf⋅ft 1.0 lbf⋅ft (1.4 N⋅m)
  • lbf.ft N.m
  • lbf.ft kgf.m


VOLUME
(Full list)
system unit unit-
code 		abbrev-
iation 		notes sample default
conversion 		combination
output units
SI cubic metre m3 m3 US spelling: cubic meter
one kilolitre 		1.0 m3 (35 cu ft)
cubic centimetre cm3 cm3 US spelling: cubic centimeter
one millilitre 		1.0 cm3 (0.061 cu in)
cc cc
cubic millimetre mm3 mm3 US spelling: cubic millimeter
 1.0 mm3 (6.1×10−5 cu in)
non-SI metric kilolitre kl kl US spelling: kiloliter
one cubic metre 		1.0 kl (35 cu ft)
kL kL
litre l l US spelling: liter
one cubic decimetre
Allows triple output units. See: full list. 		1.0 l (0.22 imp gal; 0.26 US gal)
  • l impgal
  • l USgal
  • l U.S.gal
  • l USdrygal
  • l U.S.drygal
L L
  • L impgal
  • L impqt
  • L USgal
  • L U.S.gal
  • L USdrygal
  • L U.S.drygal
centilitre cl cl US spelling: centiliter
 1.0 cl (0.35 imp fl oz; 0.34 US fl oz)
cL cL
millilitre ml ml US spelling: milliliter
one cubic centimetre 		1.0 ml (0.035 imp fl oz; 0.034 US fl oz)
  • ml impoz
  • ml USoz
  • ml U.S.oz
mL mL
  • mL impoz
  • mL USoz
  • mL U.S.oz
Imperial
&
US customary 		cubic yard cuyd cu yd 1.0 cu yd (0.76 m3)
cubic foot cuft (cufoot) cu ft long code "cufoot" outputs cubic foot (and never feet) 1.0 cu ft (0.028 m3)
cubic inch cuin cu in 1.0 cu in (16 cm3)
Imperial imperial barrel impbbl imp bbl 36 imp gal 1.0 imp bbl (160 l; 36 imp gal; 43 US gal)
imperial bushel impbsh imp bsh 8 imp gal 1.0 imp bsh (36 l; 8.0 imp gal; 8.3 US dry gal)
impbu imp bu
imperial gallon impgal imp gal 4.54609 litres by definition, also
4 imp qt or 8 imp pt or 160 imp fl oz
Allows triple output units. See: full list. 		1.0 imp gal (4.5 l; 1.2 US gal)
  • impgal l
  • impgal L
  • impgal USgal
  • impgal U.S.gal
  • impgal USdrygal
  • impgal U.S.drygal
imperial quart impqt imp qt 1/4 imp gal or 40 imp fl oz 1.0 imp qt (1,100 ml; 38 US fl oz)
imperial pint imppt imp pt 1/8 imp gal or 20 imp fl oz 1.0 imp pt (0.57 l)
imperial fluid ounce impoz (impfloz) imp fl oz 1/160 imp gal 1.0 imp fl oz (28 ml; 0.96 US fl oz)
  • impoz USoz
  • impoz U.S.oz
  • impoz ml
  • impoz mL
US customary
liquid measure 		US barrel USbbl US bbl 31½ US gal
used for liquids except for oil and beer (see the full list) 		1.0 US bbl (120 l; 32 US gal; 26 imp gal)
U.S.bbl U.S. bbl
barrel oilbbl bbl 42 US gal 1.0 bbl (0.16 m3)
US beer barrel USbeerbbl
(usbeerbbl) 		US bbl 1.0 US bbl (120 l; 31 US gal; 26 imp gal)
U.S.beerbbl
(usbeerbbl) 		U.S. bbl
US gallon USgal US gal 231 cubic inches by definition, also
4 US qt or 8 US pt or 128 US fl oz
Allows triple output units. See: full list. 		1.0 US gal (3.8 l; 0.83 imp gal)
  • USgal l
  • USgal L
  • USgal impgal
U.S.gal U.S. gal
  • USgal l
  • USgal L
  • USgal impgal
US quart USqt US qt 1/4 US gal or 32 US fl oz 1.0 US qt (950 ml)
U.S.qt U.S. qt
US pint USpt US pt 1/8 US gal or 16 US fl oz 1.0 US pt (0.47 l; 0.83 imp pt)
U.S.pt U.S. pt
US fluid ounce USoz
(USfloz) 		US fl oz 1/128 US gal 1.0 US fl oz (30 ml)
  • USoz ml
  • USoz mL
  • USoz impoz
U.S.oz
(U.S.floz) 		U.S. fl oz
  • U.S.oz ml
  • U.S.oz mL
  • U.S.oz impoz
US customary
dry measure 		US dry barrel USdrybbl US dry bbl 105/32 US bsh 1.0 US dry bbl (0.12 m3)
U.S.drybbl U.S. dry bbl
US bushel USbsh US bsh 2150.42 cubic inches by definition 1.0 US bsh (35 l; 8.0 US dry gal; 7.8 imp gal)
U.S.bsh U.S. bsh
US bushel USbu US bu 2150.42 cubic inches by definition 1.0 US bu (35 l; 8.0 US dry gal; 7.8 imp gal)
U.S.bu U.S. bu
US dry gallon USdrygal US dry gal 1/8 US bsh
Allows triple output units. See: full list. 		1.0 US dry gal (4.4 l)
  • USdrygal l
  • USdrygal L
  • USdrygal impgal
U.S.drygal U.S. dry gal
  • U.S.drygal l
  • U.S.drygal L
  • U.S.drygal impgal
US dry quart USdryqt US dry qt 1/32 US bsh 1.0 US dry qt (1,100 ml)
U.S.dryqt U.S. dry qt
US dry pint USdrypt US dry pt 1/32 US bsh 1.0 US dry pt (550 ml)
U.S.drypt U.S. dry pt


PRESSURE
unit unit-
code 		abbrev-
iation 		sample default
conversion
gigapascal GPa GPa 1.0 GPa (150,000 psi)
megapascal MPa MPa 1.0 MPa (150 psi)
kilopascal kPa kPa 1.0 kPa (0.15 psi)
hectopascal hPa hPa 1.0 hPa (0.015 psi)
pascal Pa Pa 1.0 Pa (0.00015 psi)
millipascal mPa mPa 1.0 mPa (1.5×10−7 psi)
millibar mbar mbar 1.0 mbar (1.0 hPa)
mb mb
decibar dbar dbar 1.0 dbar (10 kPa)
bar bar (none) 1.0 bar (100 kPa)
kilobarye kBa kBa 1.0 kBa (1.0 hPa)
barye Ba Ba 1.0 Ba (0.10 Pa)
standard atmosphere atm atm 1.0 atm (100 kPa)
torr Torr Torr 1.0 Torr (0.13 kPa)
millimetre of mercury mmHg mmHg 1.0 mmHg (0.13 kPa)
inch of mercury inHg inHg 1.0 inHg (3.4 kPa)
pound per square inch psi psi 1.0 psi (6.9 kPa)
FUEL EFFICIENCY
unit unit-
code 		notes combinations
kilometres per litre km/l (km/L) Use km/L to get "km/L"
  • km/l mpgimp
  • km/l mpgus
litres per 100 kilometres l/100 km (L/100 km) Use L/100 km to get "L/100 km"
  • l/100 km mpgimp
  • l/100 km mpgus
litres per kilometre l/km (L/km) Use L/km to get "L/km"
  • l/km impgal/mi
  • l/km usgal/mi
miles per imperial gallon mpgimp
  • mpgimp mpgus
miles per US gallon mpgus (mpgUS, mpgU.S.) Use mpgUS to get "US"

Use mpgU.S. to get "U.S."
mpgus will give "U.S." if spelling is
set to US & "US" otherwise

  • mpgus mpgimp
imperial gallons per mile impgal/mi
  • impgal/mi
US gallons per mile usgal/mi (USgal/mi, U.S.gal/mi) As above with the us vs US vs U.S.
  • usgal/mi
The mpgUS, mpgU.S., USgal/mi vs U.S.gal/mi, km/L, L/100 km and L/km variants work within combinations also (making 36 combinations in total).
POPULATION DENSITY
unit unit-
code 		notes combinations
inhabitants per square kilometre PD/km2 PD stands for population density, i.e. humans (inhabitants)
  • PD/km2 PD/sqmi
per square kilometre /km2 Used when the word 'inhabitants' would be inappropriate.
  • /km2 /sqmi
inhabitants per hectare PD/ha
  • PD/ha PD/acre
per hectare /ha
  • /ha /acre
inhabitants per square mile PD/sqmi PD stands for population density, i.e. humans (inhabitants)
  • PD/sqmi PD/km2
per square mile /sqmi Used when the word 'inhabitants' would be inappropriate.
  • /sqmi /km2
inhabitants per acre PD/acre
  • PD/acre PD/ha
per acre /acre
  • /acre /ha
COST PER UNIT MASS
unit unit-
code 		notes combinations
dollars per pound $/lb "$" can mean US$, HK$, etc.
  • (none)
dollars per kilogram $/kg
  • (none)
dollars per troy ounce $/ozt 12 troy ounces in 1 troy pound
  • (none)

Parameter list

Parameter options for {{convert}}
Parameter Value Description Note
|abbr in Use symbol for first (left-hand side) unit Unit display
off Use name for all units Unit display
none
on Use symbol for all units Unit display
out Use symbol for right-hand side unit (default) Unit display
unit Use symbol for all units when using scientific notation Unit display
values Omit both the input and output units: show only the numbers Unit display
~ Shows both unit name and symbol Unit display
mid User-specified text after the input unit; sets adj=on (adjective). Expects 1 unnamed parameter. Word adding, adjective
on Unit name is adjective (singular and hyphenated) Grammar, adjective
pre User-specified text before input unit. Expects 1 unnamed parameter. Word adding
ri0 Round input with precision 0 Input precision
ri1 Round input with precision 1 Input precision
ri2 Round input with precision 2 Input precision
ri3 Round input with precision 3 Input precision
|comma 5 Only use comma for thousands separator if 5 or more digits Number format
gaps Use gaps (space), not comma, for thousands separator Number format
off No thousands separator Number format
|disp b Join input and output using " (...)" (default) Join values
sqbr Join input and output using " [...]" Join values
br Join input and output using "<br/>" Join values
comma Join input and output using ", " Join values
or Join input and output using " or " Join values
number Display output number only Parts only
output number only
out Display only output number and name/symbol Parts only
output only
preunit Text to be inserted after value and before units, for both input and output, with optionally different text for output. Expects 1 or 2 unnamed parameters. Word adding
table Output is suitable for a table cell with align="right" Table columns
tablecen Output is suitable for a table cell with align="center" Table columns
unit Display input name/symbol only (not input number, not output) Parts only
unit2 Display output name/symbol only (not input; not output number) Parts only
x Join input and output using user-specified text Word adding
|frac N Show imperial number in fractions, denominator=N Number format, fraction
|input P2048 (e.g.) Reads and converts Wikidata property Inside template
|lk in Link left-hand side unit name or symbol Unit link
on Link all unit names or symbols (but not twice for the same unit) Unit link
out Link right-hand side unit name or symbol Unit link
|order flip Inverts order of input, output measurements (conversion first) Order
out Displays output units in the order entered, skipping input unit Order
|qid Q1056131 (e.g.) Reads Wikidata property from Wikidata item Inside template; testing
|qual Q613628 (e.g.) Qualify Wikidata property
|round 5 Rounds calculation to the nearest multiple of 5 Output precision
25 Rounds calculation to the nearest multiple of 25 Output precision
each In a range, each number is rounded by the default rounding Output precision
|sigfig N Round output number to N significant figures (N is a positive integer) Output precision
|sortable on Adds invisible sort key Table sort
|sp us Use U.S. spelling ("meter" instead of default "metre") Spelling U.S. names
|spell in Spell input number in words Spelling numbers
In Spell input number in words with first letter uppercase Spelling numbers
on Spell input and output numbers in words Spelling numbers
On Spell input and output numbers in words with first letter uppercase Spelling numbers
|$ € Replace $-sign with a currency sign, for example in $/acre (no currency conversion happens) Cost per unit
|debug yes Debugging only. In a sortable table: show the normally hidden sort key Table sort
|disp flip Deprecated. Use |order=flip Order
|sing= Deprecated. Use |adj= Plurals

Deprecated options

 This list: 

Deprecated options should not be used. They may produce incorrect or undesired results and there is no guarantee that they will be supported in the future.

  • disp=flip is deprecated. Use order=flip instead
  • sing= is deprecated in any situation. Use adj= instead
  • Range separator |xx| is deprecated (not MOS compliant). Use |x| instead
  • Range separator |*| is deprecated (not MOS compliant). Use |x| instead

TemplateData

This is the TemplateData for this template used by TemplateWizard, VisualEditor and other tools. See a monthly parameter usage report for this template in articles based on this TemplateData.

TemplateData for Convert

Converts measurements to other units.

Template parameters

ParameterDescriptionTypeStatus
value1

the value to convert

Numberoptional
from unit2

Lineoptional
to units3

the unit to convert into

Lineoptional
precision or suffix4

significant digits after decimal dot or, if negative, exponent of ten

Numberoptional
link unitslk

“on” all, “in” input, “out” output or “off” no units

Default
off
Lineoptional
abbreviationabbr

display for the units: “on” unit symbols, “off” all unit names in full words, “in” input unit symbol, “out” abbreviated output units, “values” no units at all

Default
out
Lineoptional
spellingsp

“us” display U.S. spelling of unit names

Lineoptional
adjectiveadj

adjective form (singular unit name appended by hyphen) “on” or “mid” to put conversion at end

Lineoptional
conversiondisp

display conversion result: “or” after ‘or’, “x” with custom prefix and suffix, “b” in parentheses, “table”/“tablecen”, “output only” alone, “output number only” alone and without unit, “unit” not at all but input unit; if the value is a number it is used as precision

Default
b
Lineoptional
orderingorder

“flip” returns converted value first, input value second.

Lineoptional
significant figuressigfig

number that sets the number of significant figures

Numberoptional
rounding outputround

“5” rounds the output number to nearest multiple of 5, “25” to nearest multiple of 25, “each” rounds each number in a range

Lineoptional
thousands separatorcomma

Sets or suppresses thousand separator in the numbers. “off” = no separator; “gaps”: use space not comma; “5” and “gaps5”: only add separator when number > 5 positions (10,000 or more)

Default
on
Lineoptional
sort keysortable

“on” generates a hidden sort key

Lineoptional

See also

Template:Navbox convert

Retrieved from "https://zoophilia.wiki/index.php?title=Template:Convert/doc&oldid=30390"